Reference Guide
Core systems and build logic.
Scoops
Rule
1 scoop = 1 oz — always
Scoop counts below are per category and size. Use exact values — no guessing.
Original Breves
Original Mochas
Classics (Lattes, Mochas, Breves, Macchiatos, Cold Brews)
Iced Lemonade
Seven Fizz Chiller
Seven Energy Chiller
Special 7's
You will be tested on Special 7 scoop counts
Whole Milk Chiller
Mocha Chiller
Tea Chiller
Smoothies
Shakes
Matcha Chiller
Seven Fizz
Iced Tea
Lemonade Chiller
Hot Tea
Chai Chiller
Iced Seven Energy
S.F. & Milk Alt Mocha
S.F. Seven Energy Chiller
Lemon Freeze
Flavored Water
Cream Modifier
Applied on top only — does not affect base scoops
Sweetness System
Note
Flavor = syrup combinations found within the secret menu
Less Sweet
Adjust scoops using these rules:
After adjusting the scoop count:
Example: Medium Snickerdoodle Breve, 1/2 Sweet
Original scoop count = 2
1/2 Sweet → use half → 1 total scoop
Split across 2 syrups:
1 ÷ 2 = 1/2 each
Example: Medium Razor Berry Green Tea, 3/4 Sweet
Original scoop count = 2
3/4 Sweet → use three quarters → 1 1/2 total scoops
Split across 3 syrups:
1 1/2 ÷ 3 = 1/2 each
Example: Large Cookie Butter Blondie Breve, 1/2 Sweet
Original base scoop count = 2
1/2 Sweet → use half → 1 total
Split by 2 flavors:
1 ÷ 2 = 1/2 per flavor
Cookie Butter (3 syrups):
1/2 ÷ 3 = 1/6 each
Blondie (2 syrups):
1/2 ÷ 2 = 1/4 each
Final:
Example: Large Cookie Butter Blondie + Cupcake Breve, 3/4 Sweet
Original base scoop count = 2
3/4 Sweet → use three quarters → 1 1/2 total
Blondie is MAIN flavor → gets half of total:
1/2 of 1 1/2 = 3/4
Remaining: 1 1/2 − 3/4 = 3/4 split between Cookie Butter + Cupcake:
3/4 ÷ 2 = 3/8 each
Blondie (2 syrups):
3/4 ÷ 2 = 3/8 each
Cookie Butter (3 syrups):
3/8 ÷ 3 = 1/8 each
Cupcake (1 syrup):
3/8
Final:
Extra Sweet Modifier
Adjust scoop counts with these rules:
After adjusting the total:
Example: Large Black Mamba + Blood Orange Energy, Extra Sweet
Original base scoop count = 2
Extra Sweet adds 1 → 3 total
Split by 2 flavors:
3 ÷ 2 = 1 1/2 per flavor
Black Mamba (3 syrups):
1 1/2 ÷ 3 = 1/2 each
Blood Orange (2 syrups):
1 1/2 ÷ 2 = 3/4 each
Final:
Extra Scoop
Adds +1 scoop to ONE syrup only. Does NOT affect other syrups.
Rule: Extra Scoop targets a single syrup, leaving all others unchanged.
Splitting Scoops Between Syrups
When a drink has multiple syrups, divide the total scoops evenly. Use fractions when needed — never round.
Total scoops ÷ number of syrups = scoops per syrup
2 scoops, 2 syrups
2 ÷ 2 = 1 each
3 scoops, 2 syrups
3 ÷ 2 = 1 1/2 scoops each
2 scoops, 3 syrups
2 ÷ 3 = 2/3 each
Syrup System
Regular Syrups
Sugar-Free Syrups
Sugar-Free Syrups
Important:
Sugar-free syrups trigger Special 7 in chillers. Sugar-free replaces regular syrup, not added on top.
Shot Counts
Espresso Fundamentals
Shot Timing
Shot Measurement
Extra Shot Measurement & Adjustments
Use a "waterfall" pour method:
Pour espresso into the scoop until it slightly flows over the edge. This ensures a consistent, full measurement.
Grind Adjustments
Espresso Types
Does not change build flow. Only affects caffeine.
Kids Rule
Kids: always 1 shot
Kids always = 1 shot regardless of drink type
Breve / Mocha
Latte / Macchiato
House Blend
Cappuccino
Extra Shots
Shots only apply to drinks that allow espresso.
Triple 7
6 shots total
A Triple 7 drink is built to a total of 6 shots.
Do not add 6 extra shots to the normal shot count.
Bases
Milk Bases
Alternative Base Rules
A milk alternative is any base requested in a drink that does not normally use that base. This includes oat, almond, coconut, skim, 2%, whole, breve, and mocha — depending on the drink.
Energy Bases
Fizz Bases
Lemonade Bases
Tea Bases
Tea Bag Counts
Kids / S / M / L
Standard Drink Bases
What each drink normally uses
Purée Options
Available Purées
Rule: Flavor → Purée Matching
If a smoothie name contains a purée flavor, that purée is used
Fill the cup to the purée fill line using that purée
Purée is part of the smoothie base — fill to the correct purée line first, then add ICM.
Example: Large Strawberry Banana Smoothie
Add 2 scoops Banana
Fill to 12 oz line with Strawberry purée
Then add Ice Cream Mix (ICM)
Continue normal smoothie build
Smoothie build order: Scoop flavors → Purée fill → ICM → Ice
Drizzles
Regular Drizzles
Used for lining cups or as a finishing drizzle when cold foam or whipped cream is included.
Sugar-Free Drizzles
Sugar-free drizzles do not affect scoop counts or build flow.
When to Apply
Cup lining — line the cup before filling with ice
Finishing drizzle — drizzle the top when cold foam or whipped cream is included
Toppings
Added On Top
Applied to the surface of the finished drink.
Mixed In
Added to the mix tin before tom-toming — not a final-step topping.
Rules
Cold Foam, Whipped Cream, and Cinnamon Powder (On Top) are added after the drink is built. Cinnamon Powder (Mixed In) is added to the mix tin before tom-toming.
Cinnamon Powder (Mixed In) goes into the mix tin before tom-toming
Cold Foam, Whipped Cream, Cinnamon (On Top) are added after the drink is complete
Special 7
What Special 7 Is
Special 7 is a replacement build for chillers that cannot be pulled from the chiller machine.
Chillers normally use a pre-made frozen base from the machine. When ordered sugar-free or with a milk alternative, that base can no longer be used.
Hand-built from scratch
Built using the Special 7 flow
Built with different scoop counts than a standard chiller
Special 7 replaces the chiller machine completely and changes both the build process and scoop counts.
Why Special 7 Exists
Chiller machines use pre-made bases that contain sugar and/or dairy
Sugar-free drinks cannot use that base
Milk alternatives cannot use that base
Because of this, the drink must be built manually
Triggers
ONLY these conditions activate Special 7
Sugar-free request
Milk alternative (not whole milk or mocha mix)
Decaf or Half Caf
Chiller requested with less shots
No-flavor chiller requested half sweet
What Changes When Special 7 Is Used
The drink is no longer pulled from the chiller machine
The drink is hand-built using the Special 7 flow
The drink uses Special 7 scoop counts (not standard chiller counts)
The build method AND recipe amounts both change
This is a full build replacement, not just a process change.
Standard Chiller vs Special 7
Standard Chiller
Pulled from machine
Uses pre-made base
Standard scoop counts
Faster build
Special 7
Hand-built
No machine base
Different scoop counts
Different build flow
Mocha Exception
When a mocha chiller becomes Special 7:
Use HALF dark chocolate instead of mocha mix
This is because mocha mix is not used in the Special 7 version.
Special 7 Scoop Counts
Special 7 uses different scoop counts than standard chillers because the machine base is no longer used.
Special 7 Fill Lines
You will be tested on WHEN Special 7 is triggered and HOW it changes both the build process and scoop counts.
Cup Sizes & Fill Lines
Cold Builds
You will be tested on fill lines and cup sizes
Ice Modifier Rules
Extra Ice
Cup size increases to the next size up
Fill line remains the SAME as the original size
Large Extra Ice
Keep same fill line (16 oz)
Top with additional ice
Use a dome lid
Light Ice
Adds +4 oz liquid
Level ice with top of logo
No Ice / Fill
Fill the cup with the base to full volume
No ice displacement applied
No Ice / No Fill
Fill the mix tin to the appropriate fill line with the base
Do NOT top off in the cup
Hot Builds
Hot Temperatures
Milk temperature affects taste and drink quality.
Overheating burns milk and ruins flavor.
Ratios (Frozen)
Note
All values in oz
S = Small / M = Medium / L = Large
Smoothies
Chai Chillers
Matcha Chiller
Lemon Freeze
Lemonade Chillers
Shakes
SF Energy Chillers
Fizz Chillers
Build Flows
Chiller (Standard Machine Build)
Chillers are pre-made frozen coffee bases pulled directly from a machine, not blended from scratch.
Prep (for understanding only):
• Whole Milk Chiller → espresso + sugar + whole milk
• Mocha Chiller → espresso + mocha mix (contains sugar)
Drizzle cup if needed
Pull chiller from machine
Leave room for flavor, shots, toppings
Add flavor and any extra shots
Add toppings and drizzle
Lid
This is NOT a blended drink during service — it is dispensed from the machine and then customized.
Iced Breve / Latte / Mocha
Add flavor scoops to the mix tin
Pour espresso shots into the mix tin (on top of flavor)
Fill mix tin to the correct oz line with base (breve, mocha, or milk)
Fill the cup with ice
Tom-tom: transfer the drink between the ice cup and mix tin to mix before finishing in the ice cup
Add toppings if applicable
Lid
Flavor goes in FIRST, then shots on top. Tom-tom happens AFTER the ice cup is filled.
Iced Macchiato
Add flavor scoops to the mix tin.
Fill mix tin with milk to the correct oz line
Line cup with drizzle if needed (caramel, chocolate, etc.)
Fill cup with ice
Tom-tom: transfer milk between the mix tin and ice cup to chill and combine
Pull espresso shots OVER the milk (do not mix)
Add toppings if applicable
Lid
Macchiatos are layered drinks. Shots always go on top and are not mixed in. Do NOT pull shots into the mix tin like a breve. This is a cup-built drink.
Iced Teas & Lemonades
Add flavor scoops to the mix tin
Fill mix tin to the correct oz line with base (tea or lemonade)
Fill cup with ice
Tom-tom: transfer the drink between the mix tin and ice cup to mix
Add toppings if applicable
Lid
These follow the same flow as iced coffee drinks, but WITHOUT espresso. Do NOT add shots—teas and lemonades never get espresso.
7 Energy Chiller
Pull the 7 Energy Chiller from the machine
Leave room for flavor, toppings, cold foam, or whipped cream
Add flavor scoops
Add toppings if applicable
Lid
Regular 7 Energy Chillers are machine-pulled drinks, not hand blended during service. Do NOT hand blend a regular 7 Energy Chiller. Energy drinks do NOT get espresso shots.
Sugar-Free 7 Energy Chiller
Add flavor scoops to the blender
Add sugar-free 7 Energy
Fill and ice the cup
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Sugar-free 7 Energy Chillers are hand blended because the normal machine base contains sugar and cannot be used. Do NOT pull a sugar-free 7 Energy Chiller from the machine.
Iced 7 Energy & 7 Fizz
Add flavor scoops to the mix tin
Fill mix tin to the correct oz line with base (7 Energy or 7 Fizz)
Fill cup with ice
Pour mix over ice into the cup
Add cream on top if ordered
Add toppings if applicable
Lid
These are ICED drinks (not chillers). Do NOT tom-tom. This is a straight pour over ice. NOTE: This only applies to iced 7 Energy/Fizz builds. 7 Energy Chillers and Sugar-Free 7 Energy Chillers have separate, different build flows.
Hot Breve / Latte / Mocha
Add flavor scoops to the cup
Pour espresso shots into the cup (on top of flavor)
Steam milk in the steam tin
Pour steamed milk into the cup
Add toppings if applicable
Lid
Hot drinks are built in the cup, but milk is always steamed separately first. Do NOT use a mix tin. Do NOT tom-tom or mix hot drinks.
Cappuccino
Add flavor scoops to the cup
Pull espresso shots into the cup (on top of flavor)
Steam milk in the steam tin, creating foam
Pour steamed milk into the cup, holding back some foam
Finish by adding foam on top
Add toppings if applicable
Lid
Cappuccinos must have foam on top. That is what separates them from lattes. Do NOT make it like a latte—foam is required.
Smoothies
Add flavor scoops to the blender
Add purée
Add ICM
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Smoothies use purée + ICM as the base.
Shakes
Add flavor scoops to the blender
Add ICM
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Shakes use ICM only (no purée unless specified).
Matcha Chiller
Add flavor scoops to the blender
Add matcha concentrate
Add ICM
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Matcha chillers use both matcha concentrate and ICM.
Chai Chiller
Add flavor scoops to the blender
Add chai concentrate
Add ICM
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Chai chillers follow the same structure as matcha but with chai.
Lemon Freeze
Add flavor scoops to the blender
Add lemon concentrate
Add ICM
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Lemon Freeze is built in the blender using lemon concentrate and ICM.
Lemonade Chiller
Add flavor scoops to the blender
Add lemon concentrate
Add lemonade
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Lemonade chillers use lemon concentrate and lemonade as the base.
7 Fizz Chiller
Add flavor scoops to the blender
Add 7 Fizz
Fill cup with ice
Pour ice into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
7 Fizz Chiller is built in the blender using Fizz as the base.
Special 7
Add flavor scoops to the mix tin
Add milk or base (milk alternative, whole milk, or SF setup)
Fill the cup with ice
Tom-tom: transfer between mix tin and ice cup to combine
Top off ice in the cup if needed
Pour contents into the blender
Blend
Pour back into the cup
Add toppings if applicable
Lid
Special 7 replaces the chiller machine. It is always hand-built. Do NOT pull from the machine. Do NOT use standard chiller process.
You will be tested on the Special 7 frozen build flow
General Knowledge
Roles
First point of contact for every guest. Sets the tone with friendly, welcoming energy. Takes orders, enters them accurately, and confirms drinks by repeating the full order back to the guest.
Uses the syrup rack to build drinks by adding flavors first, then pulling espresso shots while maintaining proper shot standards. Works quickly and accurately using knowledge of recipes, scoop systems, and shot counts before passing drinks to Front Milk.
Front machine may build drinks for both lanes when needed.
Completes drinks by handling cups, ice, milk or alternatives, drizzles, toppings, and final presentation. Relies on strong knowledge of bases, cup sizes, and finishing details to ensure every drink is correct before handing it to Lane 2.
This is where the stand comes to life.
Lane is the foundational role of the stand. It defines the guest experience through direct interaction, awareness, and attention to detail.
Lane 2 delivers drinks, connects with guests, and confirms each order before handoff. This role requires strong communication and consistency to ensure every drink is correct and every interaction feels intentional.
Builds drinks using the syrup rack by adding flavors first, then pulling espresso shots while maintaining proper shot standards. Uses recipe knowledge, scoop systems, and shot counts to ensure consistency before passing drinks to Back Milk.
Finishes drinks with cups, ice, milk or alternatives, drizzles, toppings, and final assembly. Uses understanding of bases, cup sizes, and drink finishes to ensure accuracy before handing drinks to Lane 1.
The last step—and the one guests remember.
As part of the foundational lane role, Lane 1 controls the final interaction, ensuring drinks go out quickly, correctly, and with confidence. Maintains organization, manages flow, and confirms each order before handoff.
Works the espresso machine while supporting overall drink production. Regularly makes frozen and hand-blended drinks such as smoothies, shakes, and chai chillers, while also building hot drinks during rushes to reduce load on the main machines. Requires a strong understanding of ratios and build flows to maintain speed and consistency.
Supports the entire stand by eliminating bottlenecks and stepping in wherever needed. Keeps all stations stocked (lids, cups, beans, ice, syrups, fridges), assists with drink production during rushes, and may run drinks for milk positions and lanes. Maintains cleanliness and prepares premixes during downtime, including teas, lemonades, chiller batches, and flavors such as Blondie (vanilla + caramel).
Order Confirmation Standard
Standard format — used every time.
Lanes repeat each order before drinks go out the door whenever possible to ensure accuracy.
Always repeat in this order:
Size
Temperature
Modifications
Drink name
Finished details
Examples
Large iced extra sweet Blondie with cold foam and caramel drizzle
Medium hot Cookie Butter with whipped cream